Easy-Tech manufactures three kinds of speed transducers developed for applications in AC motors:
Hole 17 mm close Hole 17 mm open
Hole 12 mm close Hole 12 mm open
Hole 27 mm close Hole 27 mm open
The encoder can detect the rotative motion of the toothed wheel fixed to the motor shaft and it generates two electrical signals (square wave and open collector type), usual for such encoders.
? 67mm Encoder
AB two pulses (Phase Difference 900) ，Housing with aluminum ring ( 64 pulse)
1. Main Parameter
| Parameter | Parameter Values | Parameter | Parameter Values |
| Pulse number | 64 | Working voltage | 4.5--24V DC |
| Output signal | NPN | Load current | Max25mA |
| A.B phase difference | 90±20° | Signal duty cycle | 50%±5% |
| Output low level | <0.5V | Output high level | >VCC-0.5V |
| Response frequency | 0.2--20kHz | Working temperatuer | -40℃~140℃ |
| Protective registration | IP67 | Sensing distance | 0-2mm |
| Connection method | 4 line | Connector | DJ7041-1.5-11 4lineTerminal Male |
| Terminal Female | DJ7041-1.5-21 or 282088-1 |
2. Connector Wiring Instruction
| Sort | Explain | Connector marking |
| 1(Red） | VCC | + |
| 4(Black） | GND | - |
| 3(White） | OUT A | A |
| 2(Green） | OUT B | B |
3. About how to judge the signal, you should observe from the motor shaft after you finished installing
the encoer. Don't observe from the gearteeth.
This series of new energy vehicle speed encoder,mainly used in automobile earbox, engine,motor and other places.
Small Size,Waterproof and dustproof.
Anti-vibration,Anti-impact,Temperature stability.
Good EMC anti-interference ability.
The standard model, whose related SME code is E68EC050A01 and the holed model, whose related SME code is E68EC067A01. Easy-Tech encoder totally keep the same technical parameters and dimension like two codes.
Easy-Tech manufactures three kinds of speed transducers developed for applications in AC motors:
Hole 17 mm close Hole 17 mm open
Hole 12 mm close Hole 12 mm open
Hole 27 mm close Hole 27 mm open
The encoder can detect the rotative motion of the toothed wheel fixed to the motor shaft and it generates two electrical signals (square wave and open collector type), usual for such encoders.
? 67mm Encoder
AB two pulses (Phase Difference 900) ，Housing with aluminum ring ( 64 pulse)
1. Main Parameter
| Parameter | Parameter Values | Parameter | Parameter Values |
| Pulse number | 64 | Working voltage | 4.5--24V DC |
| Output signal | NPN | Load current | Max25mA |
| A.B phase difference | 90±20° | Signal duty cycle | 50%±5% |
| Output low level | <0.5V | Output high level | >VCC-0.5V |
| Response frequency | 0.2--20kHz | Working temperatuer | -40℃~140℃ |
| Protective registration | IP67 | Sensing distance | 0-2mm |
| Connection method | 4 line | Connector | DJ7041-1.5-11 4lineTerminal Male |
| Terminal Female | DJ7041-1.5-21 or 282088-1 |
2. Connector Wiring Instruction
| Sort | Explain | Connector marking |
| 1(Red） | VCC | + |
| 4(Black） | GND | - |
| 3(White） | OUT A | A |
| 2(Green） | OUT B | B |
3. About how to judge the signal, you should observe from the motor shaft after you finished installing
the encoer. Don't observe from the gearteeth.
This series of new energy vehicle speed encoder,mainly used in automobile earbox, engine,motor and other places.
Small Size,Waterproof and dustproof.
Anti-vibration,Anti-impact,Temperature stability.
Good EMC anti-interference ability.
The standard model, whose related SME code is E68EC050A01 and the holed model, whose related SME code is E68EC067A01. Easy-Tech encoder totally keep the same technical parameters and dimension like two codes.
